Our company will have regular meetings every day, to talk about the welder operation procedures and so on.

1. Wear labor protection supplies correctly, wear safety helmet, welder gloves, wear welder work clothes and working shoes.Select the appropriate depth of electric welding filter glass.

2. Check before the use, the tap wire and power wire shall not be damaged; the welding clamp insulation device shall be complete and good; reliable grounding protection, bench and workpiece, and the casing of the welding machine and its auxiliary equipment shall be reliably grounded.

3. Clean up the flammable items on the work site before welding.No wet items shall be placed on the welding machine.

4. Do not move the welding machine by yourself.Wiring, wiring, or fault, should be to the electrician and repair team for repair.

5. Welding or cutting near the flammable objects and inside and outside the flammable and explosive containers. When repairing the tank cars that have stored dangerous goods, licenses should be obtained, safety measures should be taken, and work can be carried out after inspection by the safety personnel.

6. Tie up the seat belt for working at high altitude.

7. People enter the container to work, to exhaust and ventilation.

8. Prevent arc and splashing from hurting the skin and eyes of yourself and others, and remind people next to it when arc.

9. When welding with the rotary clamture, you must confirm that the rotation of the fixture is over, reliable positioning and start work.

10. Do not cross the pipeline across the channel.

11. After the welding machine is started, the welder's hand and body shall not casually contact the secondary circuit conductor, such as the live part, worktable, welding parts of welding pliers or welding gun, etc.

12. When adjusting the welding wire out of the welding gun, do not put the gun head against the human body.

13. Cut off the power supply of the welding machine before leaving work.